MS 880 MAGNUM® - $1,879.95 DSRP



Quantity:

Reserve with STIHL Express for In-Store Pick Up

This heavy-duty chainsaw offers maximum power for the most demanding cutting conditions.

With the MS 880 MAGNUM® you get the most power of any STIHL professional chainsaw. Designed for the big tasks, this saw is ideal for felling and bucking large diameter trees. Precision balanced with excellent handling and reliability, this chainsaw will take up to a 59-inch guide bar— for the most demanding cutting jobs.

Print Spec Sheets
MS 880 MAGNUM® Specifications
DISPLACEMENT 121.6 cc (7.42 cu. in.)
ENGINE POWER 6.4 kW (8.6 bhp)
POWERHEAD WEIGHT 10.1 kg (22.3 lbs.)
FUEL CAPACITY 1300 cc (44.0 oz.)
CHAIN OIL CAPACITY 700 cc (23.7 oz.)
OILOMATIC® CHAIN .404" RM, RS
3/8" RS3
GUIDE BAR LENGTHS* (Recommended ranges) 43 to 150 cm (17" to 59")
STIHL ROLLOMATIC®
POWER SOURCE Gas
STIHL recommends #3626 (36 RS3 75) OILOMATIC® saw chain and 21" 3002 000 9123 Ematic™ guide bar combination. The actual listed guide bar length can vary from the effective cutting length depending upon which powerhead it is installed.
Model Features
  • Zoom
    STIHL ElastoStart™
    The ElastoStart™ starter handle is an exclusive feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
  • Zoom
    IntelliCarb™ Compensating Carburetor
    The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
  • Zoom
    Side-Access Chain Tensioner
    The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
  • Zoom
    Decompression Valve
    The decompression valve, also referred to as 'deco' or 'deco valve', vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
Standard Features
  • Zoom
    Common Features for Chainsaws
    View the features common to many STIHL chainsaws.

Important Information
WARNING! The occurrence called “kickback” can cause serious or fatal injury. Always read the instruction manual carefully before using your saw. STIHL uses a green and yellow color-coding system to help you select a powerhead, bar and chain combination that complies with the kickback requirements of ANSI Standard B175.1 (gasoline-powered saws) and §30 of UL 1662/ ANSI Standard B175.1 (electric chainsaws). Ask your STIHL dealer about safe operating procedures and the advantages of the STIHL Quickstop® chain brake, STIHL Quickstop® Plus (Q) additional chain braking feature, STIHL reduced kickback bars and STIHL low-kickback saw chains.

STIHL recommends the use of green reduced kickback bars and green low kickback chains on all STIHL chainsaws.
* The actual listed guide bar length can vary from the effective cutting length based on which powerhead it is installed on.
Note: STIHL recommends use of fuel with no more than 10% Ethanol content. Using fuel with greater than 10% Ethanol content may cause damage to your equipment and may void your STIHL warranty. Learn More…
WARNING! Improper use of any power tool may cause serious or fatal injury. Read, understand and follow carefully the operating and safety instructions in your instruction manual before using such products.

STIHL products sold through U.S. STIHL Dealers are for distribution in the United States only.
Click to view the STIHL Limited Warranty Time Periods
Optional Accessories
  • Zoom
    Wrap Handle (R)
    Saw can be used in multiple positions for felling or limbing with hands in the proper positions.
We Also Suggest
  • HP Ultra 2-Cycle Engine Oil Zoom
    HP Ultra 2-Cycle Engine Oil
    HP Ultra is a fully synthetic 2-cycle engine oil specially suited for high performance chainsaws and power tools. This oil has outstanding engine cleaning characteristics, plus “ultra” superior lubricating qualities in comparison to other 2-cycle engine oils. It is ideal for use in STIHL 4-MIX® engines. This oil is biodegradable, degrading by 80% in 21 days.

    •2.6 oz. bottle makes 1 gallon mix

    •5.2 oz. bottle makes 2 gallon mix

    •6.4 oz. bottle makes 2 1/2 gallon mix

    •12.8 oz. bottle makes 5 gallon mix

    STIHL recommends a mix of 50:1 high-quality 89 octane or higher unleaded gasoline to STIHL engine oil. This same mix ratio should be used during break-in.

  • Bar and Chain Oil Zoom
    Bar and Chain Oil
    STIHL Bar and Chain oil is formulated to adhere to the bar and chain, and to reduce wear. Special agents in the oil formulation help keep sap and pitch from clinging to the bar and chain.

    Available in quart and gallon bottles, 5 gallon pails and 55 gallon drums, in both summer and winter weights.

  • Complete Filing Kits Zoom
    Complete Filing Kits
    Kits available for the following chain types: STIHL PICCO Mini; 1/4" pitch chain; .325" pitch chain; 3/8" pitch chain; .404" pitch chain.
    Includes file guide, depth gauge, round file, flat file and two file handles in tool pouch.
    Chain Pitch File Diameter File Guide
    Part Number
    Sharpening Kit
    Part Number
    in. mm in. mm Part Number
    3/8 PMN 9.32 5/32 4.0 0811 411 8073

    5605 750 4327

    5605 007 1026

    1/4
    3/8 PM
    6.35
    9.32
    5/32 4.0 0811 411 8091

    5605 750 4327

    5605 007 1027

    0.325 8.25 3/16 4.8 0811 412 8088

    5605 750 4328

    5605 007 1028

    3/8 9.32 13/64 5.2 0814 243 3384 5605 750 4329

    5605 007 1029

    0.404 10.26 7/32 5.5 0811 412 8108 5605 750 4330

    5605 007 1030

For Your Safety
  • Pro Mark™ Forestry Helmet System Zoom
    Pro Mark™ Forestry Helmet System
    The STIHL Pro Mark™ Forestry Helmet System is a premium quality product, designed with NRR 25 hearing protection and adjustable ratchet-style six-point suspension.
  • STIHL Pro Mark™ Dynamic Protective Gloves Zoom
    STIHL Pro Mark™ Dynamic Protective Gloves
    Durable and hardworking, STIHL Pro Mark™ Dynamic Gloves deliver professional-grade hand protection. The palm and inner fingers are made of full grain tanned leather, so you can work with comfort without sacrificing a firm hold. Featuring multiple layers of cut-retardant materials – Avertic® Pro and Dyneema fabrics by Engtex® – these gloves will help deliver protection without compromising the dexterity you need while operating a chainsaw. Accented with an orange rip-stop nylon backing, these dynamic gloves offer style and protection. Water repellant, breathable and featuring a Velcro wrist closure, STIHL Pro Mark™ Dynamic Gloves are as ready for the woods as you.
  • Two-Tone Work Glasses Zoom
    Two-Tone Work Glasses
    The lightweight STIHL Two-Tone Work Glasses feature a hollowed-out framework that is lightweight and comfortable to wear. Protect your eyes with ANSI standard Z87.1+ lenses, offering 99% UV protection – so you don’t have to slow down when the sun is beating down. Featuring flexible rubber temple tips and nose pads, the STIHL Two-Tone Work Glasses deliver a soft, comfortable fit for all those tough outdoor tasks that demand your full attention. Stop by our showroom to see them for yourself!
  • STIHL Pro Mark™ Hi-Vis Zip Chap Zoom
    STIHL Pro Mark™ Hi-Vis Zip Chap

    If you are a tree care or emergency service professional working along roadways, we recommend the Pro Mark™ Hi-Vis Zip Chaps. They combine full wrap-around lower leg protection with high-visibility nylon fabric that meets Class E reflective requirements and earns a Class 3 reflective rating when worn with the Class 2 reflective vest. The chaps also feature reflective tapes made from Reflexite Brilliance Series GP-340, making them visible by motorists traveling up to 50 mph. Inside, there are nine layers of Avertic™ Pro by Engtex® cut retardant material, helping reduce the risk or severity of injury in the event of contact with a rotating saw chain on a gasoline-powered chainsaw. Rows of heavy-duty zippers run along the entire inseam of the chaps, helping to ensure they are an effective fit and are easy to put on and/or remove. Stop by our showroom today and check out these versatile chaps.


Are You Ready for a STIHL?

MS 880 MAGNUM® is rated 4.5 out of 5 by 23.
Rated 5 out of 5 by from It has preformed great for what I got it for. Got the saw to cut down big cotton wood trees that have caught on fire do to lightning. Im on a volunteer fire department. Never falles a storm comes through and caches a trees on fire. I got tired of late nights watching to make sure the trees don't start a grass fire. Now I can get the tree down and out.
Date published: 2015-01-16
Rated 5 out of 5 by from The big timber champ I've been a professional timber faller for over 35 years. I specialize in jacking big timber. I love the MS880. I run 3/8, .063 full skip chisel chain with an 8 tooth sprocket and this saw will comfortably pull a 60" bar. One of my favorite features of this saw is the flat sided starter cover. It is much easier to sight in my lay with this flat cover as compared to the rounded cover on the 660's. I normally run a 42" bar on the 880 but when the wood gets big or difficult (like really steep ground), I'll pull a 50" or 60" bar. I do the falling with the 880 and buck the big 16's off the butt with it then finish out the top of the trees with a 660. This saw was made for people like me. It's powerful, smooth, quiet, light weight and reliable.
Date published: 2014-12-01
Rated 5 out of 5 by from This is a good saw but it is a handful I just bought a ms 660 and a MS 880 some of my older saws was stolen the 880 is powerful it runs beautifully with it I purchased a skip chain a 41 and 60 inch bar I cut oak wood this monster goes through it like butter I had steel products for 10 years never had manufacturer defects but like anything else you have to maintain them if you want the least amount of trouble in the field if I had to replace them again I would do it the same choice
Date published: 2014-05-27
Rated 5 out of 5 by from Easy to start, very dependable. I have been using Stihl saws for years. My bigger saws were the O46 and the O66. Both are great saws. I recently purchased the 880 with a 41 inch bar, thinking it would have around 1/5 more power than my O66 for cutting through bigger logs. I was disappointed in the power with the longer bar. I ordered a 30 inch bar and chain to try and get the cutting speed where I had expected it. It did cut faster, but for the money I would stick with the O66 (now the 660).
Date published: 2014-01-29
Rated 5 out of 5 by from Awesome saw and a dream to operate! I bought this saw about six months ago and have ripped through hundreds if not thousands of board feet of storm damaged red oak, white oak, hickory and poplar. it is not amazingly hard to start once you get a feel for it. usually takes two or three pulls in the all the way down throttle position and then move one up and another two or three pulls and it fires right up! i have found that warming it up a bit at say half throttle keeps it from cutting off numerous times. i do run high octane fuel and the new two cycle engine oil for all three of my Stihl saws.
Date published: 2014-01-15
Rated 5 out of 5 by from A great saw for big wood A big powerful saw that will cut large wood with no problems. My 880 is equiped with a 47 inch bar and full comp chain when I cut up large oak trees here. Never have had a time where the saw was not able to do the job I ased it to do. I change to a 24" bar when I need to cut rounds into pieces small enough to move around and load onto my trailer. It cuts a good bit faster than my 066, doing the same job. Would not want to lug it around all day, but for the uses I have for it, the 880 is a perfict choice. It is also great to see the look on peoples faces when they get to run this big of a saw for the first time.
Date published: 2013-12-20
Rated 5 out of 5 by from this saw has alot more power than any other saw out there i log for a living and im allways runnning my 880 and great has a ton of power to turn a 50" bar and chain and i highly recommend this product its the best on the market
Date published: 2013-11-04
Rated 5 out of 5 by from motocross motor in the chainsaw! I recently buy a Stihl ms 880 ,and im impress of the power of this saw!!wow!a 122cc engene,the pound of the saw is perfectly balanced and run stronger with long bars,the ms 880 is in other class!start easily with decompressive valve and elastostart starter!i recommend for experimented users!
Date published: 2013-10-20
Rated 1 out of 5 by from Not to happy I just bought 880 brand new and only 7 cuts with it and done for. The dealer said it needs new power head.I owen 30 stihl saw never seen anything like this before.
Date published: 2013-10-19
Rated 3 out of 5 by from my died after 6 months? I am a stihl fan I buy everything stihl I am lately becoming unhappy with there products. The 404 grinder wheels are not lasting long at all they break off after sharpening half a chain.. I bought a ms880 in very good used condition 2years ago it was the older model 880 with the massize muffler that saw was amazing I retired it because I rolled s big tree over it. Even after that it still ran like a monster.I bought a brand new 880 6 months ago it had problems from the beginning I felt much less power and weaker compression. Today it died I took it to Stihl they are telling me the piston and cylinder are bad . I always run St IHL 2 cycle oil. ? Over all not happy with this saw.Stihl needs to design a better air intake filter . I have the 660 and 880 there is far to much dust getting past the air filter and burning up my saws!!!!!However I have 6 bars for this saw so I will buy another 880. And hope for a longer lasting saw with no factory defects!!
Date published: 2013-07-02
Rated 5 out of 5 by from One Heck of a Saw I have two MS880's one with a 32" bar and one with a 41" bar. I use the 41" to fell and the other for bucking, stumpage, or "just in case". You don't want to be felling a huge tree near structures and not have a backup saw of equal size. I have to say it is a HUGE jump in weight from the 660, however, the ease of which it pulls a .404 standard sequence chain over a 32"+ bar through extremely dense grain Texas Live Oak is really remarkable. I wouldn't worry much about the size getting you hurt unless you are climbing over limbs with the saw still running. It's so heavy that the power doesn't throw the saw back at you like the smaller saws. The only reason to have a saw like this is to fell or buck trees that are at least 40" diameter. Don't expect to cut firewood with this thing without taking a couple breaks.
Date published: 2013-04-23
Rated 5 out of 5 by from stihl ms880 if your going to run a big saw like a stihl ms880 or a stihl 084 i highly recommended you use the decompression valve when starting this big boy.i started out on smaller saw like the stihl 025,029,ms310,038,and finally went to a 066 and now i have two stihl 084,s.i run a stihl full skip tooth chain on it 404 .63.gauge which is great for cutting big.i would recommend this saw to anyone.with experience
Date published: 2013-03-26
Rated 1 out of 5 by from Extremly hard to start Stihl makes the best chainsaws. So I bought 2 more 391's and 2 880sStarting the new 880's is a real pain. I got some defects or I lost all my muscle mass..Its so bad Im building a holding frame to hold the saw so I can use both arms to yankon pull cord. Work terrific when running. But by the time I get them running I feel like retiring. Any suggestions. My old ones were easy to start and dealers say there is nothing wrong with new ones. I hate them.
Date published: 2013-01-26
Rated 5 out of 5 by from ITS WORTH IT THE STIHL MS880 IS great for useing if you are a tree faller. the saw dose have to have the gas and oil filled alot and air filter cleaned but its a good saw. Iam a first generration tree faller and i use this saw every time i fall a tree's. if you put a smaller bar on it will work but it's main purpose is to use with big trees and a bigg bar on it
Date published: 2012-12-08
Rated 5 out of 5 by from The ultimate power saw I purchased the MS880 Magnum new in 2007 with a 36" bar for my tree service. I started off using it for firewood and to supply power to a 60" Granberg MKIII Alaskan saw mill. I have sawn several thousand board feet of lumber with this saw and felled dozens of large trees. The saw mill loads the engine when making a full width cut, but the saw powers through.My only complaint is the air filter. It requires constant cleaning. I would like to see a more efficient pre cleaning system to extend run time between filter cleanings. This is also a heavy saw, but it performs well in large log cuts like no other saw.
Date published: 2012-10-24
  • y_2017, m_12, d_10, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_2, bvpage2n
  • co_hasreviews, tv_0, tr_23
  • loc_en_US, sid_ms880, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_stihl